飞起来

铮?  H Hello- I have an unusual problem perhaps someone could shed some light on: I have a TR-4 in 29K serial range that functions normally except it will not go back into receive, until after approx 30 second delay, after the mic button is released or the function switch turned back to "SSB". This condition worsens (longer delay) the more you frequently you transmit. The sidetone disappears but T-R relay will not release. I have tried different known-good 6EV7 tubes, have replaced a lot of the coupling / bypass caps in T-R circuits, did resistance / voltage checks, adjusted the VOX / VOX delay controls, tried other tubes in T-R circuit, etc. to no avail. What is real curious about this is that while waiting for it to go back into receive and T-R relay is engaged, IF YOU PULL THE 6EV7 FROM ITS SOCKET THE T-R RELAY STILL DOES NOT RELEASE. I suspect the issue is with the lead that goes from T-R relay coil to pin #1 on 6EV7 (somehow allowing enough leakage to ground?) or could it be the T-R relay coil itself I made sure socket / pins and all are clean on 6EV7. Any help appreciated, thanks. Perplexed, Byron WA5THJ.    P

nba彩票滚球 铮? L   Z

由于 Hadoop 的复杂性，可能会存在一些找不到 Jar 包的情况，在这种情况下，请查看并修改 目录下的 和 脚本来适应您的环境；或者在某些 Hadoop 的发行版中 (如 AWS EMR 5.0)， 脚本不会保留原始的 值，可能会引起 “NoClassDefFoundError” 的报错。为了解决这个问题，请在 下找到 脚本，并在其中搜索 ，查看它是否是如下形式：   P    O

   A 铮?
 D

  铮?G

  铮?G

  铮?V 
V亚盘林十月气温

?   G

 ?  O   Q

   W

铮? ? Y

Hello- I have an unusual problem perhaps someone could shed some light on: I have a TR-4 in 29K serial range that functions normally except it will not go back into receive, until after approx 30 second delay, after the mic button is released or the function switch turned back to "SSB". This condition worsens (longer delay) the more you frequently you transmit. The sidetone disappears but T-R relay will not release. I have tried different known-good 6EV7 tubes, have replaced a lot of the coupling / bypass caps in T-R circuits, did resistance / voltage checks, adjusted the VOX / VOX delay controls, tried other tubes in T-R circuit, etc. to no avail. What is real curious about this is that while waiting for it to go back into receive and T-R relay is engaged, IF YOU PULL THE 6EV7 FROM ITS SOCKET THE T-R RELAY STILL DOES NOT RELEASE. I suspect the issue is with the lead that goes from T-R relay coil to pin #1 on 6EV7 (somehow allowing enough leakage to ground?) or could it be the T-R relay coil itself I made sure socket / pins and all are clean on 6EV7.    PMandatory维度怎么买球彩票   P

铮?  B  铮?Z

   L   Z

? ? ? ?数据仓库选择Hive，存储主要分为三类数据，包括设备、用户和生产数据。每天全量拉取线上数据库的数据，数据仓库保留最近两天的数据。定时任务脚本定时清理过期分区的数据。   S 铮?  I

   Z    Y

 铮? S 18074期足彩

   N

创建增量Cube的过程和创建普通Cube的过程基本类似，只是增量Cube会有一些额外的配置要求铮?  O    Y

   P

铮?  F   铮?O

 
L

   G

Apache Kylin系统可以分为在线查询和离线构建两部分。   A竞彩足球完整版即时比分直播 
 B

飞起来

   G在单个聚合组中，可以对维度设置一些高级属性，如Mandatory Dimensions、Hierarchy Dimensions、Joint Dimensions等。这几种属性都是为优化Cube的计算而设计的，了解这些属性的含义对于更好地使用Cube至关重要。   R

铮?  M ---------------------------------------------------------------------- Submissions: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] - unsubscribe drakelist in body Hopelessly Lost: [EMAIL PROTECTED] - help in body of message Zerobeat Web Page: - sponsored by ----------------------------------------------------------------------    Z

   J上半滚球独赢什么意思    W

铮?  E CUL, Byron. ----- Original Message ----- From: "Garey Barrell" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, April 29, 2008 1:46 PM Subject: Re: [drakelist] TR-4 TX Hang-Up    H

  铮?X

   K

   Q 铮?
M

   S

   G    T

   M

点击 Web界面的“Model”→“Data source”下的“Load Hive Table Metadata”图标，然后输入表的名称（可以一次导入多张表，以逗号分隔表名）（如图2-1所示），点击按钮“Sync”，Apache Kylin就会使用Hive的API从Hive中获取表的属性信息。铮?铮? U

   Q  铮?R

竞彩数据下载   X   B

铮?  K    O

如果查询是在Apache Kylin的Web GUI上进行的，查询结果会以表的形式展现，如图2-33所示。所执行的Cube名称也会一同显示。用户可以点击“Visualization”按钮生成简单的可视化图形，或点击“Export”按钮下载结果集到本地。   L   F

   V Ron / WB4HFN -------------- Original message -------------- From: Garey Barrell <[EMAIL PROTECTED]> > > Garey Barrell made an utterance to the drakelist gang > ---------------------------------------------------------------------- > Byron - > > OK. Relays take more coil current to "pull in" than they do to "hold > in". It takes a certain amount of current through the coil (pull) to > drag the armature from it's non-energized position to the energized > position. It takes much less current to (hold) it once there, so slight > leakage might NOT be sufficient to pull, but more than enough to hold. > > I don't know of any good way to touch up the panels. The original > "paint" is so thin, (I actually think it is more a dye (anodize?) than > paint, but don't know for sure,) and as a result any sort of paint ends > up looking worse than the mark! For a small mark or two, it might be > possible to just "fill" the mark to the level of the panel, but a string > of numbers would be a real challenge. Never could understand people > that do that sort of thing, especially on the front panel!! > > I just saw your order. There are scans of both the 34-NB and the 34-PNB > manuals, with quite a bit of information, plus I have added a photograph > of the board itself with active components and alignment info > annotated. There is also a Voltage table for the NB, which has not been > previously published. It's really a straightforward design, and most > units in the field benefit from an alignment. > > A lot of the components are common between the TR-3 and TR-4, but every > once in a while they threw in a curve like that cap to keep us off > balance! :-) > > Your CDs will go out tomorrow. Thank you! > > 73, Garey - K4OAH > Glen Allen, VA > > Drake 2-B, 4-B, C-Line & TR-4/C Service Supplement CDs > > > > > Byron Tatum wrote: > > > > "Byron Tatum" made an utterance to the drakelist gang > > ---------------------------------------------------------------------- > > Hey Garey- > > Thank you for the comments and help. I start nights at work and > > will have several to complete, then I will get back into the TR-4. I > > will measure voltage as you suggest, looking for a slight voltage > > drop. Then I will check out relay itself. > > I am beginning to think that it is the magnetizing of pole piece > > and relay wear that is the problem. If it was a leakage to ground on > > the 6EV7 pin #1 lead you might think the set would go into TX on its > > own (relay energize) every now and then, of which I have never saw it do. > > One other thing- I bought a nice TR-4 from a fellow, based on > > several pictures, but the photo angles, due to glare, covered up (of > > all things) a ham's DL # engraved on the front panel in tiny lettering > > , immediately to the right of "TR-4" on front panel. Do you know of a > > touch up paint that matches the darker grey of that front panel area? > > I got the set for a decent price, it was nice and had the built in > > NB, but had a problem (as advertised). I found T-9 to be burned out in > > center area of coil form. I had a spare T-9 from a parts unit TR-3. > > Thank goodness I opened up the TR-3 T-9 transformer before I installed > > it -- it had a 56 pF cap in it that was not in the TR-4 T-9. Otherwise > > the coils looked the same. Anyway, I clipped out the capacitor and all > > went OK after the repair. That is not a fun repair for sure!! > > CUL, Byron. > > ----- Original Message ----- From: "Garey Barrell" > > To: > > Sent: Tuesday, April 29, 2008 1:46 PM > > Subject: Re: [drakelist] TR-4 TX Hang-Up > > > > > >> Byron - > >> > >> Well things were going well until you pulled the tube out of the > >> socket! :-) > >> > >> There are a limited number of possibilities in that case. The relay > >> coil leads go through the feedthrough bypass caps _under_ the power > >> connector. Of course the relay lead to the 6EV7 is the one UNDER the > >> Jones connector, the last one in the "arc" of feedthroughs there. > >> (C92) There are no more components between this feedthrough and the > >> 6EV7 tube socket. The other relay coil lead goes directly the +250V bus > >> via the next feedthrough cap along the arc, (C91). So the voltage > >> measured at the tube socket pin with the tube out should be exactly the > >> same as the +250V bus. Any drop would indicate leakage. See attached > >> photo from my CD (at reduced resolution). > >> > >> So..... Leaky C92, leaky tube socket, pinched wire. One possibility I > >> have seen a few times is the "down" stop on the relay gets hammered down > >> over the years, allowing the armature to actually touch the pole piece > >> of the coil. The pole piece is slightly magnetized, and if the armature > >> physically is in contact with it, it will "stick". An easy check is to > >> slip a piece of paper in to prevent metal to metal contact between the > >> two. The "down" stop can be bent back up to prevent this contact. > >> > >> Let us know what you find!! > >> > >> 73, Garey - K4OAH > >> Glen Allen, VA > >> > >> Drake 2-B, 4-B, C-Line & TR-4/C Service Supplement CDs > >> > >> > >> > >> > >> Byron Tatum wrote: > >>> Hello- > >>> I have an unusual problem perhaps someone could shed some light on: > >>> I have a TR-4 in 29K serial range that functions normally > >>> except it will not go back into receive, until after approx 30 second > >>> delay, after the mic button is released or the function switch turned > >>> back to "SSB". This condition worsens (longer delay) the more you > >>> frequently you transmit. The sidetone disappears but T-R relay will > >>> not release. > >>> I have tried different known-good 6EV7 tubes, have replaced a lot > >>> of the coupling / bypass caps in T-R circuits, did resistance / > >>> voltage checks, adjusted the VOX / VOX delay controls, tried other > >>> tubes in T-R circuit, etc. to no avail. > >>> What is real curious about this is that while waiting for it to go > >>> back into receive and T-R relay is engaged, IF YOU PULL THE 6EV7 FROM > >>> ITS SOCKET THE T-R RELAY STILL DOES NOT RELEASE. I suspect the issue > >>> is with the lead that goes from T-R relay coil to pin #1 on 6EV7 > >>> (somehow allowing enough leakage to ground?) or could it be the T-R > >>> relay coil itself I made sure socket / pins and all are clean on > >>> 6EV7. > >>> Any help appreciated, thanks. > >>> Perplexed, > >>> Byron WA5THJ. > >>> > >> > > > > > > ---------------------------------------------------------------------- > > Submissions: [EMAIL PROTECTED] > > Unsubscribe: [EMAIL PROTECTED] - unsubscribe drakelist in > > body > > Hopelessly Lost: [EMAIL PROTECTED] - help in body of message > > Zerobeat Web Page: - sponsored by > > ---------------------------------------------------------------------- > > > > > > ---------------------------------------------------------------------- > Submissions: [EMAIL PROTECTED] > Unsubscribe: [EMAIL PROTECTED] - unsubscribe drakelist in body > Hopelessly Lost: [EMAIL PROTECTED] - help in body of message > Zerobeat Web Page: - sponsored by > ---------------------------------------------------------------------- 铮?  I

腾讯体育可以买球赛吗   G

  铮?H

足彩输赢的概率   F   铮?E

铮?  Z

   Z 
 A

   M

竞彩足球285铮?  V

あるいは、何かのゲームのルールを人に教えるとしましょう。実際にやってみて練習しているうちに上手にできるようになってきたら、 ?  N   P

小枫解说gmod滚球